Detect falls, break-ins, fires, thefts and anything else you describeDetectanythingfallsbreak-insfirestheftsintruderswork accidentscollisionsvandalismfights
One on the front door, one on the loading dock, one in the parking lot. Each watches for what you told it, around the clock, and only speaks up when something needs you.
Keep the cameras you have
Install the Station on any computer at home or at work. It finds the cameras on your network and gives each one its own Agent. No new hardware, no rewiring.
Add cameraConnecting
Front doorEntranceFound
Loading dockWarehouseFound
Back officeOfficeFound
ParkingOutsideFound
Describe what matters, in your own words
“Someone falls and stays down.” “Someone pockets an item and skips the checkout.” Or simply “anything urgent or unusual”. Write it like you’d tell a person, then pick the cameras and the hours.
New Event×
Someone falls and stays on the floor
After 10 sAll day
Watch on
Living roomHallwayFront doorLoading dockBack office
Hear about it the moment it happens
Every alert arrives in Messages with a snapshot of what the Agent saw, and as a push notification on your phone if you want it.
9:41
KitchennowSmoke on the stoveSmoke is rising and nobody is in the kitchen.
Ask your camera anything
“Did I leave the garage open?” The Agent takes a fresh look and answers in plain words. Ask about any incident, too. Frames go straight from your Station to OpenAI, and the chat isn't saved.
Ask your cameraGarage
Did I leave the garage open?
Yes. The garage door is fully open and nobody is inside. Your car is in the driveway.
Live view · 3 fresh frames
Ask about this camera…↑
Protect your place
Give your cameras intelligence
Know when someone at home needs you. Notices a fall on the stairs, someone collapsing or lying still for too long, and stays quiet through everything else.
$9 per camera, billed monthly + local taxes. AI provider usage is billed separately.
Add cameras or cancel renewal anytime in Billing. The Station is free.
Discover cameras on this networkLooking for cameras…3 cameras found
Tapo C200192.168.1.20
Reolink E1 Outdoor192.168.1.24
Hikvision DS-2CD2347G2192.168.1.31
Get started in three steps
The Station is the small app that watches your cameras from inside your network. Leave it running on a computer on the same network as your cameras, and your Agents keep watching even with your browser closed.
1Pair a StationInstall Station, then pair this computer with your account using its pairing code.
2Add eventDescribe what your cameras should watch for in plain language.
3Add cameraConnect your camera and choose the Events it should detect.
ChatGPT in your cameras: an AI Agent for each camera you already have. You describe what matters in plain words, like “someone falls and stays down” or “smoke near the stove”, and the Agent watches for it 24/7 and tells you when it happens.
Cameras that stream on your local network, a Windows, macOS or Linux computer that’s usually on to run the Station, and a free account. Most IP cameras and video recorders that support RTSP or ONVIF work. Cameras that only stream to their maker’s cloud, like some battery doorbells, aren’t supported yet.
Your account is where you add cameras, describe Events and read alerts, from any browser. The Station is the small app that actually sees your cameras from inside your network, because they aren’t reachable from the internet, which is a good thing. Your workspace tells the Station what to watch; the Station does the watching.
Yes. Agents watch while the Station is running. If the computer sleeps, loses power or goes offline, you get a “Monitoring interrupted” message so you’re never unknowingly blind, and a “Monitoring recovered” message when it’s back.
Motion alerts fire for every cat, shadow and passing car. Agents understand what’s happening and only speak up when the Event you described actually occurs. Motion just tells them when to take a closer look.
Anything visible: falls, smoke or flames, a package being taken, someone in a space after hours, a blocked exit, a door left open, or simply “anything urgent or unusual”. You can ask for an Event to last a while before it counts, limit it to certain hours, and attach it to as many cameras as you like.
Typically within seconds. When something moves, the Agent takes a look right away and alerts you as soon as it’s confident. If you asked an Event to last a while, it waits that long first. Quiet scenes are still checked about once every five minutes.
Every alert is saved to Messages in your workspace. You can also turn on push notifications on each phone or computer you use; on iPhone, add Agentinosaurus to your Home Screen first. Webhooks can also send every alert to your own systems.
No. Video stays on your network. The Station filters frames on your computer, only selected ones are checked, and nothing is kept as video. Incident snapshots stay on your Station for up to 7 days, and live view goes directly from your Station to your browser.
Sometimes, just like a person watching a screen. Asking an Event to last a few seconds, setting schedules and cooldowns, and attaching it only to the right cameras all reduce false alarms, and each incident shows what the Agent saw so you can judge quickly. Agentinosaurus is an extra pair of eyes, not a replacement for smoke detectors, intruder alarms or medical alert systems.
Yes. One workspace can run Stations at several locations, each with many cameras.
Every purchased camera slot costs $9/month, with no base subscription fee. Webhooks and Zapier are included. Camera slots you buy are billed even while a camera is paused or unassigned. Agents use your own AI provider key, so your selected provider bills that usage directly. TypeSafe AI is the default. Monitoring starts after payment.