Camera support
Milesight cameras
Find your Milesight model and connect its local video stream to Agentinosaurus.
Before you connect
Documented for: Milesight network cameras, except fisheye models.
Use /main for the main stream or /sub for the secondary stream. Fisheye cameras use different stream settings.
- Initialise the camera, create its login and find its IP address.
- Check the RTSP port in the camera’s network settings. It is 554 unless someone changed it.
Stream address
Main stream, then the lower-resolution stream:
rtsp://CAMERA_IP:554/main
rtsp://CAMERA_IP:554/subManufacturer documentation
Check the original instructions for your hardware revision and firmware.
Milesight: RTSP streams of network cameras ↗