Camera support
Foscam cameras
Find your Foscam model and connect its local video stream to Agentinosaurus.
Before you connect
Foscam’s guide lists port 88 for many models and 554 for named exceptions. Use the port shown on your own camera.
- Complete Foscam setup, set your camera login and locate the local IP address.
- Check the RTSP port in the camera interface. Foscam uses different ports across hardware generations; do not assume its web-interface port is the streaming port.
- Use videoMain for the main stream or videoSub for the substream.
Stream address
Main stream, then the lower-resolution stream:
rtsp://CAMERA_IP:RTSP_PORT/videoMain
rtsp://CAMERA_IP:RTSP_PORT/videoSubExplore guides
R2 →Local stream setup and troubleshootingR4 →Local stream setup and troubleshootingR4M →Local stream setup and troubleshootingC1 →Foscam lists this model among the port-554 exceptions. Still confirm the configured port and hardware revision.FI9816P →Foscam lists this model among the port-554 exceptions. Still confirm the configured port and hardware revision.FI9800P →Foscam lists this model among the port-554 exceptions. Still confirm the configured port and hardware revision.FI9803PV2 →Foscam lists this model among the port-554 exceptions. Still confirm the configured port and hardware revision.
Manufacturer documentation
Check the original instructions for your hardware revision and firmware.
Foscam RTSP addresses and model-specific ports ↗Foscam R4M specifications ↗Foscam R2/R4 manual ↗