Skip to guide
AgentinosaurusLearn
Open workspace
Browse guides
← Supported cameras

Camera support

EZVIZ cameras

Find your EZVIZ model and connect its local video stream to Agentinosaurus.

Before you connect

These instructions apply to the exact models named in EZVIZ’s guide. Newer cameras with similar names may use different firmware or local-stream settings.

  1. Set up the camera in EZVIZ and find its local IP address. Keep it on the same network as the Station.
  2. Use the documented stream address below. EZVIZ’s guide uses admin as the username and the device verification code as the password.
  3. Find the verification code on the device label and enter it privately in your camera connection settings. Do not share screenshots containing it.

Stream address

rtsp://CAMERA_IP:554/ch1/main

Explore guides

C6N →Local stream setup and troubleshootingTY1 →Local stream setup and troubleshootingTY2 →Local stream setup and troubleshooting

Manufacturer documentation

Check the original instructions for your hardware revision and firmware.

EZVIZ: C6N, TY1 and TY2 local stream setup ↗