Camera support
Amcrest cameras
Find your Amcrest model and connect its local video stream to Agentinosaurus.
Before you connect
Change subtype=0 to subtype=1 for the substream.
Several models in this directory are older products. Match the full model and hardware revision when checking firmware; a similar name is not sufficient.
- Initialize the camera and set a unique camera password using Amcrest’s setup instructions.
- Find its local IP address and RTSP port in the camera’s network settings.
- Enter the stream address below with the camera login. For an NVR, choose the actual channel number instead of channel 1.
Stream address
Main stream, then the lower-resolution stream:
rtsp://CAMERA_IP:554/cam/realmonitor?channel=1&subtype=0
rtsp://CAMERA_IP:554/cam/realmonitor?channel=1&subtype=1Explore guides
IP2M-841 →Local stream setup and troubleshootingIP2M-846 →Local stream setup and troubleshootingIP3M-941 →Local stream setup and troubleshootingIP3M-HX2 →Local stream setup and troubleshootingIP2M-842 →Local stream setup and troubleshootingIP4M-1026 →Local stream setup and troubleshootingIP4M-1028 →Local stream setup and troubleshootingIP2M-841E →Local stream setup and troubleshootingIP5M-1176E →Local stream setup and troubleshootingIP8M-2493E →Local stream setup and troubleshooting
Manufacturer documentation
Check the original instructions for your hardware revision and firmware.
Amcrest: accessing products using RTSP ↗Amcrest RTSP tutorial and listed models ↗